Product: HandySCAN Industry: Automotive and Transportation
Initial Sampling of Components and Checking Serial Parts with the Handyscan 3D As well as being innovative in developing and building its wheel loaders, the long-established company Atlas Weyhausen GmbH is also innovative in its quality assurance: Since the start of 2011, the company has used the Handyscan 3D three-dimensional scanner from Creaform with Geomagic software to measure components and equipment, but also for data feedback from prototype parts. Atlas Weyhausen has produced wheel loaders for the construction industry, garden and landscaping works, agriculture, materials handling and recycling for more than 40 years, with an emphasis on quality and innovation. This means that the Quality Assurance department plays a crucial role in the medium-sized company.
The Old and the New Measuring System
Although traditional measuring systems such as coordinate measuring arms were used for quality assurance in the past, the decision was taken in 2011 to move with the times and the search began for a more innovative and flexible measuring system. The measuring arm could only record individual measuring points, not complete surfaces. The arm was not suitable for use in changing working environments either, as it constantly had to be recalibrated and installed in stable working environments; vibrations or instabilities in the working environment produced inaccurate measuring results. Even a potential additional scanning attachment for the measuring arm failed to convince. During the search for a new, more flexible system, Creaform was one of the companies invited to present their portable 3D measuring system. The Handyscan 3D Scanner impressed people almost from the start. The portable self-positioning Handyscan 3D Scanner generates precise and reproducible high-resolution 3D data. The integrated TRUaccuracy technology allows dynamic referencing, so that the part to be measured can be moved during the 3D scanning process. There is no rigid setup, as was the case with measuring arms. Mr. Ralf Vosteen, Quality Assurance employee, explains: “The major benefit of the scanner is clear to see: Freeform surfaces are easy to align, along with 3D data. A further benefit is also the data feedback into our CAD system.” Atlas Weyhausen is now using the Handyscan 3D with Geomagic Quality and Studio software for initial sampling of new components and to check serial parts in particular. The enterprise is increasingly encountering situations, however, where several installed components have to be inspected in their installed location, or where some equipment has to be recorded abroad at the supplier’s location itself. The scanner is also used to feed back data for prototype parts that are manufactured in-house for prototype production.Scanning and Reverse Engineering a Display Shell
One project where the Handyscan 3D with Geomagic software was used was the series production of the display shell for wheel loaders. The benefits of the handy 3D scanner were clear here: The first prototype parts were scanned in for measuring, aligned on the 3D model in the Geomagic Qualify software, and a color comparison was carried out to identify deviations. A section was placed in the scan to check individual dimensions. This allows all the relevant dimensions to be checked so that the tool can then be released for production. A number of features are also checked directly in the scan. The project could also have been carried out without the 3D scanner from Creaform, but that would have entailed great effort as it would only have been possible to record individual measuring points with the old measuring arm and the complete display shell could not have been digitized.
