DMP 100

ProX DMP 100


Finest details and thinnest walls. Entry level printer with outstanding accuracy and repeatability. Industry’s best surface finish.

The smallest of the ProX DMP line, the ProX DMP 100 is designed as the entry point to manufacturing small, complex fine detail metal parts at high quality using Direct Metal Printing (DMP). The ProX DMP 100 features a build volume of 100 x 100 x 100 mm (3.94 x 3.94 x 3.94 in) along with manual material loading and an optional, atmospheric controlled, external recycling station. The system supports Stainless 17-4PH and CoCr.

  • Finest details, thinnest wall thicknesses

3D Systems’ patented layer compacting technology allows using smaller particles, which in turn helps to generate finest feature detail available in the market and thinnest possible wall thicknesses

  • Best surface finish, less supports

With a surface finish quality of up to 5 Ra μm (200 Ra micro inches) less post-processing is required and sharpest corner radiuses are achieved.  Due to the proprietary powder deposition system, the ProX DMP 100 builds down to 20° angles without supports. All overhanging surfaces benefit from this much better surface quality compared to competing machines. Less supports and improved surface quality ultimately mean less post processing and less material usage – saving time and cost. In addition, you can build parts which are difficult to achieve with other printers.

  • Outstanding accuracy and repeatability

The typical accuracy on our small metal parts is +/- 50 μm (+/- 0.002 inches),

on large parts +/- 0.2%. Repeatability from part to part is approximately 20 μm (0.0008 inches).




–          Small, precision parts
–          Research and development
–          Simplified assemblies/reduced number of parts
–          Reduced weight/lightweight design
–          Enhanced fluid flow
–          Conformal cooling
–          Topology optimization
–          Mass customization
–          Uses Direct Metal Printing (DMP) technology
–          Max build envelope capacity
–          (W x D x H): 100 x 100 x 100 mm
–          (3.94 x 3.94 x 3.94 in)
–          Very dense, non-porous parts
–          Highest precision and repeatability
–          Surface finish quality of up to 5 Ra μm (200 Ra micro inches)
–          Intuitive 3DXpert software for part set-up and production
–          Materials with certified parameters
–          Complete solution (printers, materials, software and application support)
–          Exceptional surface finish and resolution
–          Prints hard to build parts
–          Minimal waste of materials
–          Able to produce parts not normally manufacturable using traditional methods
–          Fast production times
–          Consistently high accuracy parts even on first-time builds
–          Ease of use ‒ intuitive workflow

Video of Solution

Photos of Solution

Aditional Information